A1000

Enlarge Image

An inexpensive solution both for semi-automatic labeling and for the integration into automated production lines. The A1000 attaches to IDENTCO's ELP Thermal Transfer Printers. Labels are transferred with a pad, which moves between the two positions (Starting Position & Labeling Position) by a compressed-air driven pneumatic cylinder. Labels can be applied with three different methods:

Product Features

• Tamp on – Label remains in a fixed position and is pressed directly onto the product.
• Blow on – The pad moves to a pre-adjusted position approximately 10mm away from the product. Labels are then blown onto the product by an air jet stream. The print and apply cycle performs in a fixed position or in linear movement of the product.
• Roll On - The label is dispensed and moved until touching the roller of the roll on pad. At the labeling position the roller is pressed onto the product, and then applied / rolled on by the movement of the product.